Electrical Panel Relocation in Myrtle Beach, SC
A real assessment before the number, a written price before anything opens, and a permit filed as part of the job.
How much does electrical panel relocation cost in Myrtle Beach, SC?
Moving a panel typically runs $2,200 to $6,500 in Myrtle Beach, well above a like-for-like panel swap, because relocation usually means a new run of service conductors, sometimes a new meter position, and more permit review than a straight replacement.
The wide range comes down to distance and whether the meter moves with it. Relocating a panel a few feet within the same wall is a different job than moving it to the opposite side of the house or from an interior closet to an exterior wall.
Why Panels Get Relocated
Three situations drive most panel relocations in this market. A remodel or addition walls off or blocks the panel's current location, and code requires clear working space in front of it that the new layout doesn't leave. A code-clearance problem shows up on its own, independent of a remodel, when an inspector notes the panel is too close to a sink, a window, or a combustible surface. And in condo and HOA-governed communities, an association rule about where exterior equipment can be mounted sometimes forces a move that has nothing to do with the panel's electrical condition at all.
That third case is genuinely local to this market's mix of golf communities and planned developments. A homeowner replacing a panel in Grande Dunes or a similar HOA-governed neighborhood may find the association has opinions about where a meter or panel can be visible from the street, on top of whatever the building code requires.
Relocation is not the same job as a like-for-like swap, and it isn't priced the same. It requires new conductor runs, sometimes new conduit routing through walls or the exterior, and in many cases a new inspection scope covering the whole path from meter to panel, not just the box itself.
What's Included
- Site assessment for the new locationConfirms the new spot meets code clearance requirements before anything gets scheduled.
- New service conductor runWiring sized and routed from the meter (or new meter position) to the new panel location.
- Meter relocation if requiredNot always necessary, but common when the panel moves to a different side of the house.
- Permit covering the full relocation scopeA relocation permit reviews the entire path, not just the panel itself, so expect more inspection detail than a straight swap.
- Patching coordinationThe old panel location gets capped and made safe; drywall or siding patching at both the old and new locations is typically the homeowner's responsibility unless otherwise arranged.
How a Panel Relocation Works
- 01
Site visit and new-location assessment
The electrician confirms the proposed new location clears code requirements and checks whether the meter needs to move too.
Time on site: 45–60 minutes - 02
Permit filed
A relocation permit typically takes longer to review than a like-for-like swap, since it covers the full new path.
Time on site: before install day, longer review - 03
Utility coordination if the meter moves
If relocating the meter is part of the scope, the utility's crew schedule sets part of the timeline.
Time on site: utility-dependent - 04
Relocation work
New conductor run installed, new panel mounted and connected, old location made safe.
Time on site: 1–2 days, by distance and routing - 05
Inspection
Covers the new panel, the conductor run, and the old location's disposition.
Time on site: scheduled after install
Finished stateA panel in a code-compliant, permitted location, with the old location properly capped and the meter reconciled to the new layout if it moved.
HOA Sign-Off Is a Real Extra Step Here
In HOA-governed communities across this market, moving a panel or meter to a new exterior location can require association architectural-review approval before the building permit will move, in addition to whatever the city or county requires. This is a genuinely separate approval, not a formality, and skipping it risks a fine even after the permitted work is done correctly.
What Moving Your Panel Costs in Myrtle Beach, SC
USD
- Short-distance relocation, same wall or adjacent room$2,200–$3,800per homeMeter typically stays in place; shorter conductor run and simpler permit review.
- Long-distance relocation, opposite side of the house or interior to exterior$3,800–$6,500per homeLonger conductor run, more routing complexity, and often a meter move as part of the scope.
- Drywall or siding patching$300–$950add-onTypically arranged separately from the electrical work itself unless bundled in your quote.
These are typical ranges for Grand Strand; your exact price is confirmed in writing after the site assessment. HOA-driven exterior relocations often land toward the higher end once association review adds time to the process.
See meter base replacement if your relocation also requires a new service mast or weatherhead at the new location.
Electrical Panel Relocation in Myrtle Beach, SC — questions
A remodel that walls off the current location, a code-clearance problem the inspector flags, or (in this market) an HOA rule about where exterior equipment can be mounted are the three most common triggers. None of those are about the panel's electrical condition; they're about where it's allowed to be.
In HOA-governed communities across this market, yes, particularly for exterior-mounted panels or meters. Association architectural review is a separate approval from the building permit, and it's worth confirming before you settle on a new location, not after the permit's already filed.
Yes, typically. A like-for-like panel swap in place runs $1,800 to $4,800. Relocation runs $2,200 to $6,500, because it involves a new conductor run, more routing work, and often a longer permit review covering the full new path.
Not always. If the panel is moving a short distance and the meter's existing position still works with the new layout, it can stay put. Longer moves, especially to a different exterior wall, more often require the meter to move as well.
Most relocations take 1 to 2 days, depending on distance and routing complexity. If the meter also has to move, add the utility's disconnect and reconnect scheduling on top of that.
Related services
- L-100all panel services/services
- L-106meter base replacement/services/meter-base-replacement
- L-105sub panel installation/services/sub-panel-installation
- N-02the full panel upgrade cost guide/guides/panel-upgrade-cost
- A-GARpanel relocation after storm damage in Garden City/service-areas/garden-city
- W-001get a panel relocation quote/contact
Licensed, insured panel upgrades, breaker box replacement and meter base work for Myrtle Beach and Horry County.
- 01Licensed & insuredEvery job is performed by a licensed, insured electrician working to South Carolina electrical code.
- 02Fixed written pricingThe number you see after the load calculation is the number you pay. It doesn't move once the panel's open.
- 03Permits handledThe permit gets filed and the inspection gets scheduled as part of the job, not left for you to arrange.
- 04One focused serviceThis is a panel-focused practice, not a full-service electrical shop. That means less guessing on this one job type, not more upsell.
Request a quote
Tell us what your panel looks like now (age, brand if you know it, any breaker trouble) and we'll call back with next steps.
Ready for a written price?
Distance and meter involvement drive most of the cost. A site visit turns this range into a real number for your specific layout.